1078 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:SPI:DELay
(see page 1610)
Command Syntax
:SBUS<n>:SPI:DELay <value>
<value> ::= {OFF | 2-63}
The :SBUS<n>:SPI:DELay command specifies the number of bits to ignore (delay)
before decoding the MISO stream.
Query Syntax
:SBUS<n>:SPI:DELay?
The :SBUS<n>:SPI:DELay? query returns the specified number of delay bits or
"OFF" if there are none.
Return Format
<value><NL>
<value> ::= {OFF | 2-63}
See Also • ":SBUS<n>:SPI:SOURce:MISO" on page 1082
To Next Page
Loading...
