454 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
19 :FRANalysis Commands
:FRANalysis:WGEN:VOLTage:PROFile
(see page 1610)
Command Syntax
:FRANalysis:WGEN:VOLTage:PROFile {{0 | OFF} | {1 | ON}}
The :FRANalysis:WGEN:VOLTage:PROFile command enables or disables the ability
to specify amplitude ramping within different decades.
Query Syntax
:FRANalysis:WGEN:VOLTage:PROFile?
The :FRANalysis:WGEN:VOLTage:PROFile? query returns the voltage profile
setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":FRANalysis:WGEN:VOLTage" on page 453
• ":FRANalysis:PPDecade" on page 447
• ":FRANalysis:FREQuency:STARt" on page 445
• ":FRANalysis:FREQuency:STOP" on page 446
To Next Page
Loading...
