744 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:HARMonics:STANdard
(see page 1610)
Command Syntax
:POWer:HARMonics:STANdard <class>
<class> ::= {A|B|C|D}
The :POWer:HARMonics:STANdard command selects the standard to perform
current harmonics compliance testing on.
• A — IEC 61000-3-2 Class A — for balanced three-phase equipment, household
appliances (except equipment identified as Class D), tools excluding portable
tools, dimmers for incandescent lamps, and audio equipment.
• B — IEC 61000-3-2 Class B — for portable tools.
• C — IEC 61000-3-2 Class C — for lighting equipment.
• D — IEC 61000-3-2 Class D — for equipment having a specified power
according less than or equal to 600 W, of the following types: personal
computers and personal computer monitors, television receivers.
Query Syntax
:POWer:HARMonics:STANdard?
The :POWer:HARMonics:STANdard query returns the currently set IEC 61000-3-2
standard.
Return Format
<class><NL>
<class> ::= {A|B|C|D}
See Also • ":POWer:HARMonics:APPLy" on page 735
• ":POWer:HARMonics:DATA" on page 736
• ":POWer:HARMonics:DISPlay" on page 737
• ":POWer:HARMonics:FAILcount" on page 738
• ":POWer:HARMonics:LINE" on page 739
• ":POWer:HARMonics:POWerfactor" on page 740
• ":POWer:HARMonics:RUNCount" on page 743
• ":POWer:HARMonics:STATus" on page 745
• ":POWer:HARMonics:THD" on page 746
To Next Page
Loading...
