To Next Page

To Previous Page

:SEARch Commands 32

Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1217

:SEARch:SERial:LIN:MODE

(see page 1610)

Command Syntax

:SEARch:SERial:LIN:MODE <value>

<value> ::= {ID | DATA | ERRor | FRAMe | FSIGnal}

The :SEARch:SERial:LIN:MODE command selects the type of LIN information to

find in the Lister display:

• ID — searches for a frame ID.

• DATA — searches for a frame ID and data.

• ERRor — searches for errors.

• FRAMe — searches for symbolic frames.

• FSIGnal — searched for symbolic frames and a signal values.

Frame IDs are specified using the :SEARch:SERial:LIN:ID command.

Data values are specified using the :SEARch:SERial:LIN:PATTern:DATA command.

Frames, signals, and signal values are specified using the

:SEARch:SERial:LIN:SYMBolic:FRAMe, :SEARch:SERial:LIN:SYMBolic:SIGNal, and

:SEARch:SERial:LIN:SYMBolic:VALue commands. LIN symbolic data files are

loaded (recalled) using the :RECall:LDF[:STARt] command.

Query Syntax

:SEARch:SERial:LIN:MODE?

The :SEARch:SERial:LIN:MODE? query returns the currently selected mode.

Return Format

<value> ::= {ID | DATA | ERR | FRAM | FSIG}

See Also • Chapter 32, “:SEARch Commands,” starting on page 1149

• ":SEARch:SERial:LIN:ID" on page 1216

• ":SEARch:SERial:LIN:PATTern:DATA" on page 1218

• ":RECall:LDF[:STARt]" on page 815

• ":SEARch:SERial:LIN:SYMBolic:FRAMe" on page 1221

• ":SEARch:SERial:LIN:SYMBolic:SIGNal" on page 1222

• ":SEARch:SERial:LIN:SYMBolic:VALue" on page 1223

Keysight Technologies InfiniiVision 4000 X Series User Manual

Questions and Answers: