1240 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:SERial:UART:QUALifier
(see page 1610)
Command Syntax
:SEARch:SERial:UART:QUALifier <value>
<value> ::= {EQUal | NOTequal | GREaterthan | LESSthan}
The :SEARch:SERial:UART:QUALifier command specifies the data value qualifier
when searching for UART/RS232 events.
Query Syntax
:SEARch:SERial:UART:QUALifier?
The :SEARch:SERial:UART:QUALifier? query returns the current data value qualifier
setting.
Return Format
<value><NL>
<value> ::= {EQU | NOT | GRE | LESS}
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:SERial:UART:DATA" on page 1238
To Next Page
Loading...
