Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1011
:SBUS<n>:MANChester:STARt
(see page 1610)
Command Syntax
:SBUS<n>:MANChester:STARt <edge#>
<edge#> ::= from 1-256, in NR1 format
The :SBUS<n>:MANChester:STARt command specifies the starting edge of the
Manchester signal.
Query Syntax
:SBUS<n>:MANChester:STARt?
The :SBUS<n>:MANChester:STARt? query returns the starting edge number
setting.
Return Format
<edge#><NL>
See Also • ":SBUS<n>:MANChester:BASE" on page 1001
• ":SBUS<n>:MANChester:BITorder" on page 1003
• ":SBUS<n>:MANChester:IDLE:BITS" on page 1007
• ":SBUS<n>:MANChester:LOGic" on page 1008

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English