Keysight Technologies InfiniiVision 4000 X Series

780 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:SIGNals:DURation:MODulation
(see page 1610)
Command Syntax
:POWer:SIGNals:DURation:MODulation <value>[suffix]
<value> ::= value in NR3 format
[suffix] ::= {s | ms | us | ns}
The :POWer:SIGNals:DURation:MODulation command specifies the duration of
the modulation analysis.
Query Syntax
:POWer:SIGNals:DURation:MODulation?
The :POWer:SIGNals:DURation:MODulation query returns the set duration time
value.
Return Format
<value><NL>
<value> ::= value in NR3 format
See Also • ":POWer:MODulation:APPLy" on page 751
• ":POWer:SIGNals:AUTosetup" on page 776
• ":POWer:SIGNals:IEXPected" on page 785
• ":POWer:SIGNals:OVERshoot" on page 786
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 793
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 794