EasyManua.ls Logo

Keysight Technologies InfiniiVision 4000 X Series

Keysight Technologies InfiniiVision 4000 X Series
1762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
868 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:A429:SOURce
(see page 1610)
Command Syntax
:SBUS<n>:A429:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:A429:SOURce command sets the source of the ARINC 429 signal.
Query Syntax
:SBUS<n>:A429:SOURce?
The :SBUS<n>:A429:SOURce? query returns the currently set source of the ARINC
429 signal.
Use the :TRIGger:LEVel:HIGH and :TRIGger:LEVel:LOW commands to set the
threshold levels for the selected source.
Return Format
<source><NL>
See Also ":TRIGger:LEVel:HIGH" on page 1306
":TRIGger:LEVel:LOW" on page 1307
":TRIGger:MODE" on page 1308
":SBUS<n>:MODE" on page 857
":SBUS<n>:A429:TRIGger:TYPE" on page 875
":SBUS<n>:A429:SIGNal" on page 867
":SBUS<n>:A429:SPEed" on page 869
":SBUS<n>:A429:FORMat" on page 866
"Introduction to :TRIGger Commands" on page 1295

Table of Contents

Related product manuals