Keysight Technologies InfiniiVision 4000 X Series

1138 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:USBPd:SOURce
(see page 1610)
Command Syntax
:SBUS<n>:USBPd:SOURce <source>
<source> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :SBUS<n>:USBPd:SOURce command selects the USB PD waveform source.
You can use analog channels.
Query Syntax
:SBUS<n>:USBPd:SOURce?
The :SBUS<n>:USBPd:SOURce? query returns the selected analog input channel.
Return Format
<source><NL>
<source> ::= {CHAN<n>}
See Also • ":SBUS<n>:USBPd:TRIGger" on page 1139
• ":SBUS<n>:USBPd:TRIGger:HEADer" on page 1140
• ":SBUS<n>:USBPd:TRIGger:HEADer:CMESsage" on page 1142
• ":SBUS<n>:USBPd:TRIGger:HEADer:DMESsage" on page 1144
• ":SBUS<n>:USBPd:TRIGger:HEADer:EMESsage" on page 1145
• ":SBUS<n>:USBPd:TRIGger:HEADer:VALue" on page 1147
• ":SBUS<n>:USBPd:TRIGger:HEADer:QUALifier" on page 1148