:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 881
:SBUS<n>:CAN:COUNt:OVERload
(see page 1610)
Query Syntax
:SBUS<n>:CAN:COUNt:OVERload?
Returns the overload frame count.
Return Format
<frame_count><NL>
<frame_count> ::= 0 in NR1 format
Errors • "-241, Hardware missing" on page 1551
See Also • ":SBUS<n>:CAN:COUNt:RESet" on page 882
• "Introduction to :SBUS<n> Commands" on page 853
• ":SBUS<n>:MODE" on page 857
• ":SBUS<n>:CAN Commands" on page 877
To Next Page
Loading...
