Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1051
:SBUS<n>:SENT:SIGNal<s>:LENGth
(see page 1610)
Command Syntax
:SBUS<n>:SENT:SIGNal<s>:LENGth <length>
<s> ::= 1-6, in NR1 format.
<length> ::= from 1-24, in NR1 format.
The :SBUS<n>:SENT:SIGNal<s>:LENGth command specifies the bit length of the
signal being defined.
Fast Signal definition examples:
Query Syntax
:SBUS<n>:SENT:SIGNal<s>:LENGth?
The :SBUS<n>:SENT:SIGNal<s>:LENGth? query returns the signal bit length
setting.
Return Format
<length><NL>
<length> ::= from 1-24, in NR1 format.
See Also • ":SBUS<n>:SENT:CLOCk" on page 1040
• ":SBUS<n>:SENT:CRC" on page 1041
• ":SBUS<n>:SENT:DISPlay" on page 1042
• ":SBUS<n>:SENT:FORMat" on page 1044
• ":SBUS<n>:SENT:IDLE" on page 1046
• ":SBUS<n>:SENT:LENGth" on page 1047
• ":SBUS<n>:SENT:PPULse" on page 1048
• ":SBUS<n>:SENT:SIGNal<s>:DISPlay" on page 1050
• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 1053
• ":SBUS<n>:SENT:SIGNal<s>:OFFSet" on page 1055

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English