1522 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
39 Obsolete and Discontinued Commands
:MEASure:TMAX
(see page 1610)
Command Syntax
:MEASure:TMAX [<source>]
<source> ::= {CHANnel<n> | FUNCtion | MATH}
<n> ::= 1 to (# analog channels) in NR1 format
The :MEASure:TMAX command installs a screen measurement and starts an
X-at-Max-Y measurement on the selected waveform. If the optional source is
specified, the current source is modified.
Query Syntax
:MEASure:TMAX? [<source>]
The :MEASure:TMAX? query returns the horizontal axis value at which the
maximum vertical value occurs on the current source. If the optional source is
specified, the current source is modified.
Return Format
<value><NL>
<value> ::= time at maximum in NR3 format
See Also • "Introduction to :MEASure Commands" on page 568
• ":MEASure:TMIN" on page 1523
• ":MEASure:XMAX" on page 638
• ":MEASure:XMIN" on page 639
The :MEASure:TMAX command is obsolete and is provided for backward compatibility to
previous oscilloscopes. Use the :MEASure:XMAX command (see page 638) instead.
To Next Page
Loading...
