Keysight Technologies InfiniiVision 4000 X Series

1342 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
35 :TRIGger Commands
:TRIGger:NFC:RPOLarity
(see page 1610)
Command Syntax
:TRIGger:NFC:RPOLarity {{0 | OFF} | {1 | ON}}
The :TRIGger:NFC:RPOLarity ON command enables the oscilloscope to trigger on
signals with "reverse" polarity.
When OFF, the oscilloscope will trigger on signals with "obverse" polarity.
Query Syntax
:TRIGger:NFC:RPOLarity?
The :TRIGger:NFC:RPOLarity? query returns the "reverse" polarity setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":TRIGger:NFC:AEVent" on page 1340
• ":TRIGger:NFC:ATTime" on page 1341
• ":TRIGger:NFC:SOURce" on page 1343
• ":TRIGger:NFC:STANdard" on page 1344
• ":TRIGger:NFC:TEVent" on page 1345
• ":TRIGger:NFC:TIMeout" on page 1347
• ":TRIGger:NFC:TIMeout:ENABle" on page 1348
• ":TRIGger:NFC:TIMeout:TIME" on page 1349