Keysight Technologies InfiniiVision 4000 X Series User Manual

1490 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
38 :WMEMory<r> Commands
:WMEMory<r>:YSCale
(see page 1610)
Command Syntax
:WMEMory<r>:YSCale <scale>[<suffix>]
<r> ::= 1 to (# ref waveforms) in NR1 format
<scale> ::= vertical units per division in NR3 format
<suffix> ::= {V | mV}
The :WMEMory<r>:YSCale command sets the vertical scale, or units per division,
of the selected reference waveform.
Legal values for the scale are copied from the original source waveform (that is,
the analog channel or math function waveform that was originally saved as a
reference waveform).
Query Syntax
:WMEMory<r>:YSCale?
The :WMEMory<r>:YSCale? query returns the current scale setting for the
specified reference waveform.
Return Format
<scale><NL>
<scale> ::= vertical units per division in NR3 format
See Also • Chapter 38, “:WMEMory<r> Commands,” starting on page 1481
• ":WMEMory<r>:DISPlay" on page 1484
• ":WMEMory<r>:YOFFset" on page 1488
• ":WMEMory<r>:YRANge" on page 1489
• ":WMEMory<r>:SKEW" on page 1487

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English