Keysight Technologies InfiniiVision 4000 X Series User Manual

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 909
:SBUS<n>:CXPI:BAUDrate
(see page 1610)
Command Syntax
:SBUS<n>:CXPI:BAUDrate <baudrate>
<baudrate> ::= integer from 9600 to 40000 in 100 b/s increments.
The :SBUS<n>:CXPI:BAUDrate command specifies the baud rate of the CXPI
signal from your device under test.
The CXPI baud rate can be set from 9600 b/s to 40000 b/s in 100 b/s increments.
You must set the baud rate to match your device under test.
The default baud rate is 20 kb/s.
Query Syntax
:SBUS<n>:CXPI:BAUDrate?
The :SBUS<n>:CXPI:BAUDrate? query returns the baud rate setting.
Return Format
<baudrate><NL>
<baudrate> ::= integer from 9600 to 40000 in 100 b/s increments.
See Also • ":SBUS<n>:CXPI:PARity" on page 910
• ":SBUS<n>:CXPI:SOURce" on page 911
• ":SBUS<n>:CXPI:TOLerance" on page 912
• ":SBUS<n>:CXPI:TRIGger" on page 913

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English