1184 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:SERial:A429:PATTern:SDI
(see page 1610)
Command Syntax
:SEARch:SERial:A429:PATTern:SDI <string>
<string> ::= "nn" where n ::= {0 | 1}, length always 2 bits
The :SEARch:SERial:A429:PATTern:SDI command defines the ARINC 429 two-bit
SDI pattern resource according to the string parameter. This pattern controls the
SDI pattern searched for in each ARINC 429 word.
The specified SDI is only used if the :SBUS<n>:A429:FORMat includes the SDI
field.
Query Syntax
:SEARch:SERial:A429:PATTern:SDI?
The :SEARch:SERial:A429:PATTern:SDI? query returns the current settings of the
specified ARINC 429 two-bit SDI pattern resource in the binary string format.
Return Format
<string><NL>
Errors • "-241, Hardware missing" on page 1551
See Also • "Introduction to :TRIGger Commands" on page 1295
• ":SBUS<n>:A429:FORMat" on page 866
• ":SEARch:SERial:A429:MODE" on page 1182
• ":SEARch:SERial:A429:PATTern:DATA" on page 1183
• ":SEARch:SERial:A429:PATTern:SSM" on page 1185
To Next Page
Loading...
