1124 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:USB:TRIGger:DATA:LENGth
(see page 1610)
Command Syntax
:SBUS<n>:USB:TRIGger:DATA:LENGth <length>
<length> ::= data length between 1-20
The :SBUS<n>:USB:TRIGger:DATA:LENGth command specifies the data length in
bytes.
Query Syntax
:SBUS<n>:USB:TRIGger:DATA:LENGth?
The :SBUS<n>:USB:TRIGger:DATA:LENGth? query returns the specified data
length.
Return Format
<length><NL>
<length> ::= data length between 1-20
See Also • ":SBUS<n>:USB:TRIGger:DATA" on page 1123