1030 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:NRZ:SOURce
(see page 1610)
Command Syntax
:SBUS<n>:NRZ:SOURce <source>
<source> ::= {CHANnel<n> | DIGital<d>}
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:NRZ:SOURce command selects the oscilloscope channel
connected to the NRZ signal
Query Syntax
:SBUS<n>:NRZ:SOURce?
The :SBUS<n>:NRZ:SOURce? query returns the selected oscilloscope channel
source.
Return Format
<source><NL>
<source> ::= {CHAN<n> | DIG<d>}
See Also • ":SBUS<n>:NRZ:BAUDrate" on page 1021
To Next Page
Loading...
