754 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:ONOFf:APPLy
(see page 1610)
Command Syntax
:POWer:ONOFf:APPLy
The :POWer:ONOFf:APPLy command applies the selected turn on/off analysis test
(:POWer:ONOFf:TEST).
See Also • ":POWer:SIGNals:VSTeady:ONOFf:OFF" on page 790
• ":POWer:SIGNals:VSTeady:ONOFf:ON" on page 791
• ":POWer:ITYPe" on page 750
• ":POWer:ONOFf:THResholds" on page 758
• ":POWer:ONOFf:TEST" on page 757
• ":POWer:ONOFf:EXIT" on page 755
• ":POWer:ONOFf:NEXT" on page 756
• ":MEASure:ONTime" on page 655
• ":MEASure:OFFTime" on page 654
To Next Page
Loading...
