Keysight Technologies InfiniiVision 4000 X Series User Manual

:SEARch Commands 32
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1153
:SEARch:MODE
(see page 1610)
Command Syntax
:SEARch:MODE <value>
<value> ::= {EDGE | GLITch | RUNT | TRANsition | SERial{1 | 2} | PEAK}
The :SEARch:MODE command selects the search mode.
The command is only valid when the :SEARch:STATe is ON.
Query Syntax
:SEARch:MODE?
The :SEARch:MODE? query returns the currently selected mode or OFF if the
:SEARch:STATe is OFF.
Return Format
<value><NL>
<value> ::= {EDGE | GLIT | RUNT | TRAN | SER{1 | 2} | PEAK | OFF}
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:STATe" on page 1154
• ":SEARch:COUNt" on page 1151
• ":SEARch:EVENt" on page 1152

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English