Keysight Technologies InfiniiVision 4000 X Series User Manual

718 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:CLResponse:DATA:PMARgin
(see page 1610)
Query Syntax
:POWer:CLResponse:DATA:PMARgin?
After the Control Loop Response (Bode) power analysis has been performed (see
:POWer:CLResponse:APPLy), the :POWer:CLResponse:DATA:PMARgin? query
returns the phase margin in degrees.
Return Format
<phase_margin><NL>
<phase_margin> ::= phase margin in degrees in NR3 format.
The query returns +9.9E+37 if the value cannot be calculated from the last sweep
(that is, if there are no crossover points).
See Also • ":POWer:CLResponse:APPLy" on page 714
• ":POWer:CLResponse:DATA" on page 715
• ":POWer:CLResponse:DATA:GMARgin" on page 716
• ":POWer:CLResponse:DATA:GMARgin:FREQuency" on page 717
• ":POWer:CLResponse:DATA:PMARgin:FREQuency" on page 719

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English