:POWer Commands 28
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 733
:POWer:EFFiciency:TYPE
(see page 1610)
Command Syntax
:POWer:EFFiciency:TYPE <type>
<type> ::= {DCDC | DCAC | ACDC | ACAC}
The :POWer:EFFiciency:TYPE command specifies the type of power that is being
converted from the input to the output. This selection affects how the efficiency is
measured.
Query Syntax
:POWer:EFFiciency:TYPE?
The :POWer:EFFiciency:TYPE? query returns the currently specified type setting.
Return Format
<type><NL>
<type> ::= {DCDC | DCAC | ACDC | ACAC}
See Also • ":POWer:EFFiciency:APPLy" on page 732
• ":MEASure:EFFiciency" on page 650
• ":MEASure:IPOWer" on page 653
• ":MEASure:OPOWer" on page 656
To Next Page
Loading...
