Keysight Technologies InfiniiVision 4000 X Series

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1115
:SBUS<n>:USB:BASE
(see page 1610)
Command Syntax
:SBUS<n>:USB:BASE <base>
<base> ::= {ASCii | BINary | DECimal | HEX}
The :SBUS<n>:USB:BASE command determines the base to use for the USB
decode and Lister display, controlling how the data or payload field is displayed.
All other fields are displayed in hex
Query Syntax
:SBUS<n>:USB:BASE?
The :SBUS<n>:USB:BASE? query returns the currently specified base.
Return Format
<base><NL>
<base> ::= {ASC | BIN | DEC | HEX}