Keysight Technologies InfiniiVision 4000 X Series User Manual

:TRIGger Commands 35
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1347
:TRIGger:NFC:TIMeout
(see page 1610)
Query Syntax
:TRIGger:NFC:TIMeout?
The :TRIGger:NFC:TIMeout? query returns whether the timeout occurred.
With the ATRigger (Arm & Trigger) trigger event, if the second event does not
occur within the timeout period, the oscilloscope triggers when the timeout period
expires.
A return value of 1 says the desired trigger event did not occur within the specified
time after the arm event.
A return value of 0 says the desired trigger event occurred before the timeout.
Return Format
<timeout_occurred><NL>
{0 | 1}
See Also • ":TRIGger:NFC:AEVent" on page 1340
• ":TRIGger:NFC:ATTime" on page 1341
• ":TRIGger:NFC:RPOLarity" on page 1342
• ":TRIGger:NFC:SOURce" on page 1343
• ":TRIGger:NFC:STANdard" on page 1344
• ":TRIGger:NFC:TEVent" on page 1345
• ":TRIGger:NFC:TIMeout:ENABle" on page 1348
• ":TRIGger:NFC:TIMeout:TIME" on page 1349

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English