1226 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
32 :SEARch Commands
:SEARch:SERial:M1553:PATTern:DATA
(see page 1610)
Command Syntax
:SEARch:SERial:M1553:PATTern:DATA <string>
<string> ::= "nn...n" where n ::= {0 | 1}
The :SEARch:SERial:M1553:PATTern:DATA command specifies the additional 11
bits when searching for the MIL-STD-1553 Remote Terminal Address + 11 Bits.
Query Syntax
:SEARch:SERial:M1553:PATTern:DATA?
The :SEARch:SERial:M1553:PATTern:DATA? query returns the current value setting
for the additional 11 bits.
Return Format
<string><NL>
<string> ::= "nn...n" where n ::= {0 | 1}
See Also • Chapter 32, “:SEARch Commands,” starting on page 1149
• ":SEARch:SERial:M1553:MODE" on page 1225
To Next Page
Loading...
