Keysight Technologies InfiniiVision 4000 X Series User Manual

906 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:CAN:TRIGger:SYMBolic:VALue
(see page 1610)
Command Syntax
:SBUS<n>:CAN:TRIGger:SYMBolic:VALue <data>
<data> ::= value in NR3 format
The :SBUS<n>:CAN:TRIGger:SYMBolic:VALue command specifies the signal value
to trigger on when CAN symbolic data has been loaded (recalled) into the
oscilloscope and the CAN trigger mode is set to MSIGnal.
Query Syntax
:SBUS<n>:CAN:TRIGger:SYMBolic:VALue?
The :SBUS<n>:CAN:TRIGger:SYMBolic:VALue? query returns the specified signal
value.
Return Format
<data><NL>
<data> ::= value in NR3 format
See Also • ":RECall:DBC[:STARt]" on page 813
• ":SBUS<n>:CAN:TRIGger" on page 894
• ":SBUS<n>:CAN:TRIGger:SYMBolic:MESSage" on page 904
• ":SBUS<n>:CAN:TRIGger:SYMBolic:SIGNal" on page 905
NOTE
Encoded signal values are not supported in the remote interface (even though they can be
used in the front panel graphical interface).

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English