Keysight Technologies InfiniiVision 4000 X Series

850 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
30 :SAVE Commands
:SAVE:WMEMory:SOURce
(see page 1610)
Command Syntax
:SAVE:WMEMory:SOURce <source>
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :SAVE:WMEMory:SOURce command selects the source to be saved as a
reference waveform file.
Query Syntax
:SAVE:WMEMory:SOURce?
The :SAVE:WMEMory:SOURce? query returns the source to be saved as a
reference waveform file.
Return Format
<source><NL>
<source> ::= {CHAN<n> | FUNC | WMEM<r> | NONE}
See Also • "Introduction to :SAVE Commands" on page 824
• ":SAVE:WMEMory[:STARt]" on page 851
• ":RECall:WMEMory<r>[:STARt]" on page 819
NOTE
Only ADD or SUBtract math operations can be saved as reference waveforms.
NOTE
MATH is an alias for FUNCtion. The query will return FUNC if the source is FUNCtion or MATH.