To Next Page

To Previous Page

1066 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide

31 :SBUS<n> Commands

:SBUS<n>:SENT:TRIGger:FAST:DATA

(see page 1610)

Command Syntax

:SBUS<n>:SENT:TRIGger:FAST:DATA <string>

<string> ::= "nnnn..." where n ::= {0|1|X}

<string> ::= "0xn..." where n ::= {0,..,9 | A,..,F | X | $}

The :SBUS<n>:SENT:TRIGger:FAST:DATA command specifies the status and data

nibbles that will be triggered on when the FCData trigger mode is chosen.

Query Syntax

:SBUS<n>:SENT:TRIGger:FAST:DATA?

The :SBUS<n>:SENT:TRIGger:FAST:DATA? query returns the fast channel data

trigger setting.

Return Format

<string> ::= "nnnn..." where n ::= {0|1|X}

<string> ::= "0xn..." where n ::= {0,..,9 | A,..,F | X | $}

See Also • ":SBUS<n>:SENT:CLOCk" on page 1040

• ":SBUS<n>:SENT:CRC" on page 1041

• ":SBUS<n>:SENT:DISPlay" on page 1042

• ":SBUS<n>:SENT:FORMat" on page 1044

• ":SBUS<n>:SENT:IDLE" on page 1046

• ":SBUS<n>:SENT:LENGth" on page 1047

• ":SBUS<n>:SENT:PPULse" on page 1048

• ":SBUS<n>:SENT:SIGNal<s>:DISPlay" on page 1050

• ":SBUS<n>:SENT:SIGNal<s>:LENGth" on page 1051

• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 1053

• ":SBUS<n>:SENT:SIGNal<s>:OFFSet" on page 1055

• ":SBUS<n>:SENT:SIGNal<s>:ORDer" on page 1057

• ":SBUS<n>:SENT:SIGNal<s>:STARt" on page 1059

• ":SBUS<n>:SENT:SOURce" on page 1061

• ":SBUS<n>:SENT:TOLerance" on page 1063

• ":SBUS<n>:SENT:TRIGger" on page 1064

• ":SBUS<n>:SENT:TRIGger:SLOW:DATA" on page 1067

• ":SBUS<n>:SENT:TRIGger:SLOW:ID" on page 1069

• ":SBUS<n>:SENT:TRIGger:SLOW:ILENgth" on page 1071

• ":SBUS<n>:SENT:TRIGger:TOLerance" on page 1072

Keysight Technologies InfiniiVision 4000 X Series User Manual

Questions and Answers: