EasyManua.ls Logo

Keysight Technologies InfiniiVision 4000 X Series

Keysight Technologies InfiniiVision 4000 X Series
1762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1544 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
39 Obsolete and Discontinued Commands
:SBUS<n>:SPI:SOURce:DATA
(see page 1610)
Command Syntax
:SBUS<n>:SPI:SOURce:DATA <source>
<source> ::= {CHANnel<n> | EXTernal} for the DSO models
<source> ::= {CHANnel<n> | DIGital<d>} for the MSO models
<n> ::= 1 to (# analog channels) in NR1 format
<d> ::= 0 to (# digital channels - 1) in NR1 format
The :SBUS<n>:SPI:SOURce:DATA command sets the source for the SPI serial
MOSI data.
This command is the same as the :SBUS<n>:SPI:SOURce:MOSI command.
Query Syntax
:SBUS<n>:SPI:SOURce:DATA?
The :SBUS<n>:SPI:SOURce:DATA? query returns the current source for the SPI
serial MOSI data.
Return Format
<source><NL>
See Also "Introduction to :TRIGger Commands" on page 1295
":SBUS<n>:SPI:SOURce:MOSI" on page 1083
":SBUS<n>:SPI:SOURce:MISO" on page 1082
":SBUS<n>:SPI:SOURce:CLOCk" on page 1080
":SBUS<n>:SPI:SOURce:FRAMe" on page 1081
":SBUS<n>:SPI:TRIGger:PATTern:MISO:DATA" on page 1084
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:DATA" on page 1086
":SBUS<n>:SPI:TRIGger:PATTern:MISO:WIDTh" on page 1085
":SBUS<n>:SPI:TRIGger:PATTern:MOSI:WIDTh" on page 1087

Table of Contents

Related product manuals