Keysight Technologies InfiniiVision 4000 X Series User Manual

:FUNCtion<m> Commands 20
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 475
:FUNCtion<m>[:FFT]:FREQuency:STOP
(see page 1610)
Command Syntax
:FUNCtion<m>[:FFT]:FREQuency:STOP <frequency>
<m> ::= 1 to (# math functions) in NR1 format
<frequency> ::= the stop frequency in NR3 format.
The :FUNCtion<m>[:FFT]:FREQuency:STOP command sets the stop frequency in
the FFT (Fast Fourier Transform) math function's displayed range.
The FFT (Fast Fourier Transform) math function's displayed range can also be set
with the :FUNCtion<m>[:FFT]:CENTer and :FUNCtion<m>[:FFT]:SPAN commands.
Query Syntax
:FUNCtion<m>[:FFT]:FREQuency:STOP?
The :FUNCtion<m>[:FFT]:FREQuency:STOP? query returns returns the current stop
frequency in Hertz.
Return Format
<frequency><NL>
<frequency> ::= the stop frequency in NR3 format.
See Also • ":FUNCtion<m>[:FFT]:FREQuency:STARt" on page 474
• ":FUNCtion<m>[:FFT]:CENTer" on page 471
• ":FUNCtion<m>[:FFT]:SPAN" on page 480

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English