Keysight Technologies InfiniiVision 4000 X Series

1022 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
31 :SBUS<n> Commands
:SBUS<n>:NRZ:BITorder
(see page 1610)
Command Syntax
:SBUS<n>:NRZ:BITorder <bitorder>
<bitorder> ::= {MSBFirst | LSBFirst}
When the display format is WORD (see :SBUS<n>:NRZ:DISPlay), the
:SBUS<n>:NRZ:BITorder command specifies the order of transmission on the NRZ
bus:
• MSBFirst — specifies the most significant bit is transmitted first.
• LSBFirst — specifies the least significant bit is transmitted first.
Query Syntax
:SBUS<n>:NRZ:BITorder?
The :SBUS<n>:NRZ:BITorder? query returns the bit order setting.
Return Format
<bitorder><NL>
<bitorder> ::= {MSBF | LSBF}
See Also • ":SBUS<n>:NRZ:BASE" on page 1020
• ":SBUS<n>:NRZ:IDLE:BITS" on page 1027
• ":SBUS<n>:NRZ:IDLE:STATe" on page 1028
• ":SBUS<n>:NRZ:LOGic" on page 1029