1270 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
33 :SYSTem Commands
:SYSTem:RLOGger
(see page 1610)
Command Syntax
:SYSTem:RLOGger <setting>[,<file_name>[,<write_mode>]]
<setting> ::= {{0 | OFF} | {1 | ON}}
<file_name> ::= quoted ASCII string
<write_mode> ::= {CREate | APPend}
The :SYSTem:RLOGger command enables or disables remote command logging,
optionally specifying the log file name and write mode.
See Also • ":SYSTem:RLOGger:DESTination" on page 1271
• ":SYSTem:RLOGger:DISPlay" on page 1272
• ":SYSTem:RLOGger:FNAMe" on page 1273
• ":SYSTem:RLOGger:STATe" on page 1274
• ":SYSTem:RLOGger:TRANsparent" on page 1275
• ":SYSTem:RLOGger:WMODe" on page 1276
To Next Page
Loading...
