:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1023
:SBUS<n>:NRZ:DISPlay
(see page 1610)
Command Syntax
:SBUS<n>:NRZ:DISPlay <format>
<format> ::= {BIT | WORD}
The :SBUS<n>:NRZ:DISPlay command specifies the format of the NRZ bus display.
Query Syntax
:SBUS<n>:NRZ:DISPlay?
The :SBUS<n>:NRZ:DISPlay? query returns the bus display format setting.
Return Format
<format><NL>
<format> ::= {BIT | WORD}
See Also • ":SBUS<n>:NRZ:DSIZe" on page 1024
• ":SBUS<n>:NRZ:FSIZe" on page 1025
• ":SBUS<n>:NRZ:HSIZe" on page 1026
• ":SBUS<n>:NRZ:STARt" on page 1031
• ":SBUS<n>:NRZ:TSIZe" on page 1035
• ":SBUS<n>:NRZ:WSIZe" on page 1036
To Next Page
Loading...
