:WGEN<w> Commands 37
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1471
:WGEN<w>:RST
(see page 1610)
Command Syntax
:WGEN<w>:RST
<w> ::= 1 to (# WaveGen outputs) in NR1 format
The :WGEN<w>:RST command restores the waveform generator factory default
settings (1 kHz sine wave, 500 mVpp, 0 V offset).
See Also • "Introduction to :WGEN<w> Commands" on page 1435
• ":WGEN<w>:FUNCtion" on page 1446
• ":WGEN<w>:FREQuency" on page 1445
To Next Page
Loading...
