EasyManua.ls Logo

Keysight Technologies InfiniiVision 4000 X Series

Keysight Technologies InfiniiVision 4000 X Series
1762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
652 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
25 :MEASure Power Commands
:MEASure:FACTor
(see page 1610)
Command Syntax
:MEASure:FACTor [<source1>][,<source2>]
<source1>, <source2> ::= {CHANnel<n>}
<n> ::= 1 to (# analog channels) in NR1 format
The :MEASure:FACTor command installs a power factor measurement on screen.
The <source1> parameter is the channel probing voltage and the <source2>
parameter is the channel probing current. These sources can also be specified by
the :MEASure:SOURce command.
Power factor is a measure of power quality. It is the ratio of the actual AC line
power to the apparent power:
Real Power / Apparent Power
Query Syntax
:MEASure:FACTor? [<source1>][,<source2>]
The :MEASure:FACTor query returns the measured power factor.
Return Format
<return_value><NL>
<return_value> ::= the power factor value in NR3 format
See Also ":MEASure:SOURce" on page 615
":POWer:QUALity:APPLy" on page 774

Table of Contents

Related product manuals