Keysight Technologies InfiniiVision 4000 X Series

:TRIGger Commands 35
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1355
:TRIGger:PATTern:FORMat
(see page 1610)
Command Syntax
:TRIGger:PATTern:FORMat <base>
<base> ::= {ASCii | HEX}
The :TRIGger:PATTern:FORMat command sets the entry (and query) number base
used by the :TRIGger:PATTern command. The default <base> is ASCii.
Query Syntax
:TRIGger:PATTern:FORMat?
The :TRIGger:PATTern:FORMat? query returns the currently set number base for
pattern trigger patterns.
Return Format
<base><NL>
<base> ::= {ASC | HEX}
See Also • "Introduction to :TRIGger Commands" on page 1295
• ":TRIGger:PATTern" on page 1353