Keysight Technologies InfiniiVision 4000 X Series

Obsolete and Discontinued Commands 39
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1519
:MEASure:SCRatch
(see page 1610)
Command Syntax
:MEASure:SCRatch
The :MEASure:SCRatch command clears all selected measurements and markers
from the screen.
NOTE
The :MEASure:SCRatch command is obsolete and is provided for backward compatibility to
previous oscilloscopes. Use the :MEASure:CLEar command (see page 574) instead.