Keysight Technologies InfiniiVision 4000 X Series

:MARKer Commands 23
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 543
:MARKer:Y2:DISPlay
(see page 1610)
Command Syntax
:MARKer:Y2:DISPlay {{0 | OFF} | {1 | ON}}
The :MARKer:Y2:DISPlay command specifies whether the Y2 cursor is displayed.
Query Syntax
:MARKer:Y2:DISPlay?
The :MARKer:Y2:DISPlay? query returns the Y2 cursor display setting.
Return Format
<setting><NL>
<setting> ::= {0 | 1}
See Also • ":MARKer:Y2:DISPlay" on page 543