EasyManua.ls Logo

Keysight Technologies InfiniiVision 4000 X Series

Keysight Technologies InfiniiVision 4000 X Series
1762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
:SYSTem Commands 33
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1271
:SYSTem:RLOGger:DESTination
(see page 1610)
Command Syntax
:SYSTem:RLOGger:DESTination <dest>
<dest> ::= {FILE | SCReen | BOTH}
The :SYSTem:RLOGger:DESTination command specifies whether remote
commands are logged to a text file (on a connected USB storage device), logged
to the screen, or both.
Query Syntax
:SYSTem:RLOGger:DESTination?
The :SYSTem:RLOGger:DESTination? query returns the remote command logging
destination.
Return Format
<dest><NL>
<dest> ::= {FILE | SCR | BOTH}
See Also ":SYSTem:RLOGger" on page 1270
":SYSTem:RLOGger:DISPlay" on page 1272
":SYSTem:RLOGger:FNAMe" on page 1273
":SYSTem:RLOGger:STATe" on page 1274
":SYSTem:RLOGger:TRANsparent" on page 1275
":SYSTem:RLOGger:WMODe" on page 1276
NOTE
If the destination is changed while remote command logging is running, remote command
logging is turned off.

Table of Contents

Related product manuals