Keysight Technologies InfiniiVision 4000 X Series User Manual

1508 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
39 Obsolete and Discontinued Commands
:FUNCtion:GOFT:OPERation
(see page 1610)
Command Syntax
:FUNCtion:GOFT:OPERation <operation>
<operation> ::= {ADD | SUBTract | MULTiply}
The :FUNCtion:GOFT:OPERation command sets the math operation for the g(t)
source that can be used as the input to transform or filter functions (if available):
• ADD — Source1 + source2.
• SUBTract — Source1 - source2.
• MULTiply — Source1 * source2.
The :FUNCtion:GOFT:SOURce1 and :FUNCtion:GOFT:SOURce2 commands are
used to select source1 and source2.

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English