:WMEMory<r> Commands 38
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1483
:WMEMory<r>:CLEar
(see page 1610)
Command Syntax
:WMEMory<r>:CLEar
<r> ::= 1 to (# ref waveforms) in NR1 format
The :WMEMory<r>:CLEar command clears the specified reference waveform
location.
See Also • Chapter 38, “:WMEMory<r> Commands,” starting on page 1481
• ":WMEMory<r>:SAVE" on page 1486
• ":WMEMory<r>:DISPlay" on page 1484
To Next Page
Loading...
