Keysight Technologies InfiniiVision 4000 X Series User Manual

:SEARch Commands 32
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1193
:SEARch:SERial:CAN:SYMBolic:MESSage
(see page 1610)
Command Syntax
:SEARch:SERial:CAN:SYMBolic:MESSage <name>
<name> ::= quoted ASCII string
The :SEARch:SERial:CAN:SYMBolic:MESSage command specifies the message to
search for when CAN symbolic data has been loaded (recalled) into the
oscilloscope and the CAN serial search mode is set to MESSage or MSIGnal.
Query Syntax
:SEARch:SERial:CAN:SYMBolic:MESSage?
The :SEARch:SERial:CAN:SYMBolic:MESSage? query returns the specified
message.
Return Format
<name><NL>
<name> ::= quotes ASCII string
See Also • ":RECall:DBC[:STARt]" on page 813
• ":SEARch:SERial:CAN:MODE" on page 1187
• ":SEARch:SERial:CAN:SYMBolic:SIGNal" on page 1194
• ":SEARch:SERial:CAN:SYMBolic:VALue" on page 1195

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English