Keysight Technologies InfiniiVision 4000 X Series

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 867
:SBUS<n>:A429:SIGNal
(see page 1610)
Command Syntax
:SBUS<n>:A429:SIGNal <signal>
<signal> ::= {A | B | DIFFerential}
The :SBUS<n>:A429:SIGNal command specifies the signal type:
• A — Line A (non-inverted).
• B — Line B (inverted).
• DIFFerential — Differential (A-B).
Query Syntax
:SBUS<n>:A429:SIGNal?
The :SBUS<n>:A429:SIGNal? query returns the current ARINC 429 signal type
setting.
Return Format
<signal><NL>
<signal> ::= {A | B | DIFF}
Errors • "-241, Hardware missing" on page 1551
See Also • "Introduction to :SBUS<n> Commands" on page 853
• ":SBUS<n>:MODE" on page 857
• ":SBUS<n>:A429:FORMat" on page 866
• ":SBUS<n>:A429:SPEed" on page 869
• ":SBUS<n>:A429:SOURce" on page 868