To Next Page

To Previous Page

:MEASure Commands 24

Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 605

:MEASure:PPULses

(see page 1610)

Command Syntax

:MEASure:PPULses [<source>]

<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>

| <digital channels>}

<n> ::= 1 to (# analog channels) in NR1 format

<m> ::= 1 to (# math functions) in NR1 format

<r> ::= 1 to (# ref waveforms) in NR1 format

<digital channels> ::= DIGital<d> for the MSO models

<d> ::= 0 to (# digital channels - 1) in NR1 format

The :MEASure:PPULses command installs a rising pulse count measurement on

screen. If the optional source parameter is not specified, the current source is

measured.

Query Syntax

:MEASure:PPULses? [<source>]

The :MEASure:PPULses? query measures and returns the on-screen rising pulse

count.

Return Format

<value> ::= the rising pulse count in NR3 format

See Also • "Introduction to :MEASure Commands" on page 568

• ":MEASure:SOURce" on page 615

NOTE

This command is not available if the source is FFT (Fast Fourier Transform).

Keysight Technologies InfiniiVision 4000 X Series User Manual

Questions and Answers: