Keysight Technologies InfiniiVision 4000 X Series

:SBUS<n> Commands 31
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1071
:SBUS<n>:SENT:TRIGger:SLOW:ILENgth
(see page 1610)
Command Syntax
:SBUS<n>:SENT:TRIGger:SLOW:ILENgth <length>
<length> ::= {SHORt | LONG}
The :SBUS<n>:SENT:TRIGger:SLOW:ILENgth command specifies the ID and data
lengths for the Slow Message Enhanced messages. Either "SHORt" for the 4-bit
ID, 16-bit data format, or "LONG" for the 8-bit ID, 12-bit data format.
Query Syntax
:SBUS<n>:SENT:TRIGger:SLOW:ILENgth?
The :SBUS<n>:SENT:TRIGger:SLOW:ILENgth? query returns the ID and data
length setting.
Return Format
<length><NL>
<length> ::= {SHOR | LONG}
See Also • ":SBUS<n>:SENT:CLOCk" on page 1040
• ":SBUS<n>:SENT:CRC" on page 1041
• ":SBUS<n>:SENT:DISPlay" on page 1042
• ":SBUS<n>:SENT:FORMat" on page 1044
• ":SBUS<n>:SENT:IDLE" on page 1046
• ":SBUS<n>:SENT:LENGth" on page 1047
• ":SBUS<n>:SENT:PPULse" on page 1048
• ":SBUS<n>:SENT:SIGNal<s>:DISPlay" on page 1050
• ":SBUS<n>:SENT:SIGNal<s>:LENGth" on page 1051
• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 1053
• ":SBUS<n>:SENT:SIGNal<s>:OFFSet" on page 1055
• ":SBUS<n>:SENT:SIGNal<s>:ORDer" on page 1057
• ":SBUS<n>:SENT:SIGNal<s>:STARt" on page 1059
• ":SBUS<n>:SENT:SOURce" on page 1061
• ":SBUS<n>:SENT:TOLerance" on page 1063
• ":SBUS<n>:SENT:TRIGger" on page 1064
• ":SBUS<n>:SENT:TRIGger:FAST:DATA" on page 1066
• ":SBUS<n>:SENT:TRIGger:SLOW:DATA" on page 1067
• ":SBUS<n>:SENT:TRIGger:SLOW:ID" on page 1069
• ":SBUS<n>:SENT:TRIGger:TOLerance" on page 1072