Keysight Technologies InfiniiVision 4000 X Series User Manual

:SAVE Commands 30
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 843
:SAVE:RESults:FORMat:SEGMented
(see page 1610)
Command Syntax
:SAVE:RESults:FORMat:SEGMented {{0 | OFF} | {1 | ON}}
The :SAVE:RESults:FORMat:SEGMented command specifies whether segmented
memory acquisition times will be included when analysis results are saved.
Analysis results are saved using the :SAVE:RESults:[STARt] command.
Other :SAVE:RESults:FORMat commands specify whether other types of analysis
results are also saved.
When multiple types of analysis results are saved, they are all saved to the same
file and separated by a blank line.
Query Syntax
:SAVE:RESults:FORMat:SEGMented?
The :SAVE:RESults:FORMat:SEGMented? query returns whether segmented
memory acquisition times will be included when analysis results are saved.
Return Format
<off_on><NL>
{0 | 1}
See Also • ":SAVE:RESults:[STARt]" on page 838
• ":SAVE:RESults:FORMat:CURSor" on page 839
• ":SAVE:RESults:FORMat:MASK" on page 840
• ":SAVE:RESults:FORMat:MEASurement" on page 841
• ":SAVE:RESults:FORMat:SEARch" on page 842

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English