Keysight Technologies InfiniiVision 4000 X Series User Manual

Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 7
Contents
In This Book / 3
1 What's New
What's New in Version 7.30 / 40
What's New in Version 7.20 / 42
What's New in Version 7.10 / 44
What's New in Version 4.08 / 47
What's New in Version 4.07 / 50
What's New in Version 4.06 / 52
What's New in Version 4.05 / 53
What's New in Version 4.00 / 55
What's New in Version 3.20 / 58
What's New in Version 3.10 / 60
What's New in Version 3.01 / 61
Version 3.00 at Introduction / 62
Command Differences From 3000 X-Series Oscilloscopes / 63
2 Setting Up
Step 1. Install Keysight IO Libraries Suite software / 70
Step 2. Connect and set up the oscilloscope / 71
Using the USB (Device) Interface / 71
Using the LAN Interface / 71
Step 3. Verify the oscilloscope connection / 73
3 Getting Started
Basic Oscilloscope Program Structure / 78
Initializing / 78
Capturing Data / 78
Analyzing Captured Data / 79

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English