6 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
• Chapter 41, “Status Reporting,” starting on page 1557, describes the
oscilloscope's status registers and how to check the status of the instrument.
• Chapter 42, “Synchronizing Acquisitions,” starting on page 1589, describes
how to wait for acquisitions to complete before querying measurement results
or performing other operations with the captured data.
• Chapter 43, “More About Oscilloscope Commands,” starting on page 1609,
contains additional information about oscilloscope programming commands.
Finally, there is a chapter that contains programming examples:
• Chapter 44, “Programming Examples,” starting on page 1619.
Mixed-Signal
Oscilloscope
Channel
Differences
Because both the "analog channels only" oscilloscopes (DSO models) and the
mixed-signal oscilloscopes (MSO models) have analog channels, topics that
describe analog channels refer to all oscilloscope models. Whenever a topic
describes digital channels, that information applies only to the mixed-signal
oscilloscope models.
See Also • For more information on using the SICL, VISA, and VISA COM libraries in
general, see the documentation that comes with the Keysight IO Libraries
Suite.
• For information on controller PC interface configuration, see the
documentation for the interface card used (for example, the Keysight 82350B
GPIB interface).
• For information on oscilloscope front-panel operation, see the User's Guide.
• For detailed connectivity information, refer to the Keysight Technologies
USB/LAN/GPIB Connectivity Guide. For a printable electronic copy of the
Connectivity Guide, direct your Web browser to www.keysight.com and search
for "Connectivity Guide".
• For the latest versions of this and other manuals, see:
http://www.keysight.com/find/4000X-Series-manual
To Next Page
Loading...
Need help?
General
