Keysight Technologies InfiniiVision 4000 X Series User Manual

:SYSTem Commands 33
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 1261
:SYSTem:DATE
(see page 1610)
Command Syntax
:SYSTem:DATE <date>
<date> ::= <year>,<month>,<day>
<year> ::= 4-digit year in NR1 format
<month> ::= {1,..,12 | JANuary | FEBruary | MARch | APRil | MAY | JUNe
| JULy | AUGust | SEPtember | OCTober | NOVember | DECember}
<day> ::= {1,..,31}
The :SYSTem:DATE command sets the date. Validity checking is performed to
ensure that the date is valid.
Query Syntax
:SYSTem:DATE?
The SYSTem:DATE? query returns the date.
Return Format
<year>,<month>,<day><NL>
See Also • "Introduction to :SYSTem Commands" on page 1260
• ":SYSTem:TIME" on page 1279

Keysight Technologies InfiniiVision 4000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 4000 X Series
Category	Test Equipment
Language	English