752 Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
28 :POWer Commands
:POWer:MODulation:SOURce
(see page 1610)
Command Syntax
:POWer:MODulation:SOURce <source>
<source> ::= {V | I}
The :POWer:MODulation:SOURce command selects either the voltage source or
the current source as the source for the modulation analysis.
Query Syntax
:POWer:MODulation:SOURce?
The :POWer:MODulation:SOURce query returns the selected source for the
modulation analysis.
Return Format
<source><NL>
<source> ::= {V | I}
See Also • ":POWer:MODulation:APPLy" on page 751
• ":POWer:MODulation:TYPE" on page 753
To Next Page
Loading...
